In a spindle select function by address P for a multiple spindle control: 1) Address P is not specified. 2) A P code for selecting a spindle is not set in parameter No. 3781. 3) An illegal G code which cannot be commanded with an S_P_; command is specified. 4) Multi-spindle control is not enabled because bit 1 (EMS) of parameter No. 3702 is 1. 5) The spindle amplifier number of each spindle is not set in parameter No. 3717. 6) A spindle command is executed from a path in which this command is prohibited (parameter No. 11090). 7) The setting of parameter No. 11090 is incorrect. Verify parameters are set correctly. Modify the program.
Verify parameters set correctly or modify program.