PW0003 PMC Address Is Not Correct (Spindle)

  1. Home
  2. Knowledge Base
  3. TCM S Machine
  4. Alarm
  5. PW0003 PMC Address Is Not Correct (Spindle)
  1. Home
  2. Knowledge Base
  3. TCM S Machine
  4. PW0003 PMC Address Is Not Correct (Spindle)

The address to assign the spindle signal is incorrect. This alarm may occur in the following case: 1) The parameter No. 3022 setting is incorrect.

 

Quick tip:

Verify parameter No. 3022 is set correctly.

Was this article helpful?

Related Articles