- Home
- Knowledge Base
- TCM S Machine
- Alarm
Alarm
SV0646 Abnormal Analog Signal (EXT)
An error occurred in the analog 1Vp~p output of the separate detector. The separate detector, cable, or separate detector interface...
SV0652 Temperature Error
Communication between the separate detector interface unit and temperature sensor was disconnected. Check cabling and connections. Quick tip: Check...
SV0654 DB Relay Failure
A failure occurs in the dynamic brake relay of the servo amplifier. Replace the amplifier. Quick tip: Replace the...
SV1025 V-Ready ON (Initializing)
The ready signal (VRDY) of the velocity control which should be OFF is ON while the servo control is ON....
SV1026 Illegal Axis Arrange
The parameter for servo axis arrange is not set correctly. A negative value, duplicate value, or greater value than the...