Programming

Search For Search

1. Home
2. Knowledge Base
3. Programming

• G Codes 65 Articles
  • Drilling Cycles 2 Articles
    • G83 Face Peck drilling cycle
    • G87 Cross Peck drilling cycle
  • Threading Cycles 2 Articles
    • M20 Sub Spindle Collet Close
    • G76 Canned threading cycle
  • G&M Code Master List
  • G0 Rapid Move
  • G1 Linear interpolation (feed move)
  • G2 Circular interpolation clockwise direction.
  • G3 Circular Interpolation Counter Clockwise Direction.
• M Codes 91 Articles
  • M0
  • M1 Optional Stop
  • M2 Program end
  • M3 Main spindle Clockwise
  • M4 Main spindle counter clockwise

Programming G & M code limits

Up to three M codes can be programmed on a single line. Up to five G Codes can be programmed...

• 0
• 530

M0

M0- Main and Sub Program stop. Force the machine to stop.

• 0
• 522

M1 Optional Stop

M1- (M&S)Optional stop. Main and Sub If the OPTIONAL STOP button is on (lit) the executing line will stop until...

• 0
• 636

M2 Program end

M2- (M)Program End M02- Not normally used since it does not rewind to beginning of Program.

• 0
• 554

M3 Main spindle Clockwise

M3- (M)Main spindle (#1) forward (CW) rotation “M3 S1000” 10000 RPM max. M03- Can only be programmed from Main. To...

• 0
• 434

Next Page »