Alarm

PCB cooling fan motor abnormality. Check that the fan motor operates normally.   Quick tip: Check that the fan motor...

(T Series) Spindle overheat due to detection of changes in the spindle speed. 1) When the cutting load is large,...

Exceeded the positive side first stored stroke limit (parameter No. 1320). Check parameters. Power up pressing the P and CANCEL...

Exceeded the negative side first stored stroke limit (parameter No. 1321). Check parameters. Power up pressing the P and CANCEL...

Exceeded the positive side second stored stroke limit set by parameter No. 1322. Note: only active when parameter No. 1310#0...