Alarm

PS0038 Interference in Circular Block

Overcutting will occur in tool radius/tool nose radius compensation because the arc start point or end point coincides with the...

PS0039 Chamfer/Corner Round Not Allowed in G41/G42 (T Series)

Chamfering or corner R was specified with a start-up, a cancel, or switching between G41 and G42 in tool nose...

PS0041 Interference in Cutter Compensation

In tool radius/tool nose radius compensation, excessive cutting may occur. Modify the program. Quick tip; Modify program

PS0042 G45/G48 Not Allowed in CRC (M Series)

Tool offset (G45 to G48) is commanded in tool radius compensation mode. Modify the program. Quick tip; Modify program

PS0044 G27~G30 Not Allowed in Fixed Cycle (M Series)

One of G27 to G30 (G29 is only for the M series) is commanded in canned cycle mode. Modify the...

Prev Next