Alarm

PS0145 Illegal Use of G12.1/G13.1 (T Series)

(T Series) The axis No. of plane selection parameter No. 5460 (linear axis) and No. 5461 (axis of rotation) in...

PS0146 Illegal Use of G-Code (T Series)

(T Series) The G code must be G40 modal when the polar coordinate interpolation mode is set or canceled. An...

PS0148 Setting Error (M Series)

(M Series) Automatic corner override deceleration rate is out of the settable range of judgment angle. Modify the parameters (No....

PS0149 Format Error in G10L3

In registration (G10L3 to G11) of tool life management data, an address other than Q1, Q2, P1, and P2 or...

PS0150 Illegal Tool Group Number

The tool group number exceeded the maximum allowable value. The tool group number (P after specification of G10L3;) or the...

Prev Next