Alarm

PS0224 Zero Return Not Finished

A reference return has not been performed before the start of automatic operation (only when bit 0 (ZRNx) of parameter...

PS0230 R Code Not Found (M Series)

(M Series) Cut depth R is not specified in the block including G161. Alternatively, the value specified for R is...

PS0231 Illegal Format in G10 L52

Errors occurred in the specified format at the programmable-parameter input. Correct program format. Quick tip: Correct program format

PS0232 Too Many Helical Axis Commands

Three or more axes were specified as helical axes in the helical interpolation mode. Correct the program. Quick tip:...

PS0233 Device Busy

When an attempt was made to use a unit such as that connected via the RS232C interface, other users were...

Prev Next