Alarm

PS0302 Setting the Reference Position Without Dog is not Performed

The reference position could not be set for a return to the reference position without a dog. Possible causes are:...

PS0304 G28 is Commanded Without Zero Return

Although a reference position was not set, an automatic return to the reference position (G28) was commanded. Manually reference the...

PS0305 Intermediate Position is not Assigned (M Series)

(M Series) Although a G28 (automatic return to the reference position) or G30 (return to the second, third, or fourth...

PS0306 Mismatch Axis With CNR/CHF (T Series)

(T Series) The correspondence between the moving axis and the I, J, or K command is incorrect in a block...

PS0307 Can Not Start Reference Return With Mechanical Stopper Setting

An attempt was made to set a butt-type reference position for an axis for which to use the function to...

Prev Next