Alarm

PS5110 Improper G-Code (AICC Mode)

An unspecifiable G code was specified in the advanced preview control, AI advanced preview control, or AI contour control mode....

PS5131 NC Command Is Not Compatible (T Series)

(T Series) The PMC axis control and polar coordinate interpolation were specified simultaneously. Modify the program. Quick tip: Modify the...

PS5195 Direction Can Not Be Judged (T Series)

(T Series) Measurement is invalid in the tool compensation measurement value direct input B function. [For 1-contact input] 1) The...

PS5220 Reference Point Adjustment Mode

In case of distance coded linear scale I/F, the reference point auto setting parameter (No. 1819#2) is set to “1”....

PS5257 G41/G42 Not Allowed in MDI Mode

Tool radius/tool nose radius compensation was specified in MDI mode (depending on the setting of the parameter MCR (No. 5008#4))....

Prev Next