Alarm

PW1110 Illegal Parameter (Servo Motor Spindle)

The parameter for the spindle controlled with the servo motor is not set correctly. Check setup. Quick tip: Check...

PW1111 Illegal Spindle Number (Servo Motor Spindle)

The spindle number (parameter No. 11010) or spindle amplifier number (parameter No. 3717) for the spindle controlled with the servo...

PW5046 Illegal Parameter (S-Comp) (M Series)

(M Series) The parameter for setting simple straightness compensation is incorrect. Quick tip: Set parameters correctly.

SP0740 Rigid Tap Alarm: Excess Error

The positional deviation of the stopped spindle has exceeded the set value during rigid tapping. Check program and applications. ...

SP0741 Rigid Tap Alarm: Excess Error

The positional deviation of the moving spindle has exceeded the set value during rigid tapping. Check program and applications. ...

Prev Next