Alarm

SP0742 Rigid Tap Alarm: LSI Overflow

An LSI overflow has occurred for the spindle during rigid tapping. Quick tip: Check rigid tapping setup

SP0754 Abnormal Torque

An abnormal load was detected in a spindle motor. The alarm can be canceled by RESET. Check applications. Quick...

SP1202 Spindle Select Error

In a multi spindle control, the spindle number other than the valid spindle number was selected by a position coder...

SP1220 No Spindle Amplifier

Either the cable connected to a serial spindle amplifier is broken, or the serial spindle amplifier is not connected. ...

SP1221 Illegal Motor Number

The spindle No. and the Motor No. are incorrectly matched. Quick tip: Verify configuration of spindle motor and amplifier.

Prev Next