Alarm

SP1224 Illegal Spindle-Position Coder Gear Ratio

The spindle-position coder gear ratio was incorrect. Check spindle parameter settings. Quick tip: Check spindle parameter settings.

PS1805 Illegal Command

[I/O Device] An attempt was made to specify an illegal command during I/O processing on an I/O device. [G30 Reference...

PS1806 Device Type Miss Match

An operation not possible on the I/O device that is currently selected in the setting was specified. This alarm is...

PS1807 Parameter Setting Error

An illegal I/O interface is specified. The external I/O device and baud rate, stop bit and protocol selection settings are...

SP1225 CRC Error (Serial Spindle)

A CRC error (communication error) occurred in communications between the CNC and the serial spindle amplifier. Check connections between spindle...

Prev Next