G Codes

All the G codes

Drilling Cycles

2 Articles

2 Articles

G94- Facing cycle used like G92 but feeds down on X.

G96-(M only)Constant surface footage on. It must be turned back off before any T code or you get an alarm....

G97- CSFM off. Maybe have at the beginning of your program as a safety command.

G98- Feed commanded in Inch Per Minute designation. IPM used for milling. IPM=RPM*IPR

G99- Feed commanded in Inch Per Revolution designation. IPR used for turning. IPR=IPM/RPM

Prev Next