- Home
- Knowledge Base
- Programming
- G Codes
G Codes
All the G codes
Drilling Cycles
2 ArticlesThreading Cycles
2 ArticlesG13.1 Reverses G12.1 by setting control of the C axis back to C and H
G13.1- Reverses G12.1 by setting control of the C axis back to C and H Restores plane in effect before...
G17 Plane select X-Y
G17- Plane select X-Y Used for Face Milling on end of part.
G18 Plane select Z-X
G18- Plane select Z-X normally used. G18 is when power on. Normal Turning Mode
G19 Plane select Y-Z
G19- Plane select Y-Z Used for Cross Milling Using G2 and G3
G20 Inch Data Input
G20- Inch Data Input