M Codes

All the M codes

M97 Parts Counter

M97- Parts Counter With Work Counter enabled on control. The Machine will stop continuous operation when parts counter reaches desired...

M98 Sub program call

M98-(M&S) Sub program call. M98P5555 execute Sub Program O5555 1 time M98P9995555 execute sub program O5555, 999 times. loop count...

M99 End of Sub program

M99-(M&S) End of Sub program. M99 in main program returns to Beginning of Program and continues. M99P199 Jumps to Line...

M100 Cancels Rigid Tapping

M100-(M&S) Cancels Rigid Tapping Cycle if using G84 and G88. Factory also recommends G80 Not required on G184 cycle because...

M103 Sub Spindle Clockwise

M103-(M&S)Sub Spindle CW 8000 rpm max.

Prev Next