Programming

M10-(M)Main Spindle Collet Close No dwell Required after M10 Bar Loader Engages Synchro after about 288msec after collect is confirmed...

M11-(M)Main Spindle Collet Open .5 sec dwell after M11 Required Bar feeder Releases Synchro immediately on Collet Open(IEMCA) There is...

M12-(M)Main Spindle Speed arrive check M12 confirms RPM at desired rpm before cutting tool starts cut. Sample Code: T0202M3S4000 G0X.78Z0...

M13-(M)Main Spindle CW and Coolant ON

M14-(M)Main Spindle CCW and Coolant ON