- Home
- Knowledge Base
- TCM S Machine
TCM S Machine
PS5391 Can Not Use G92 (M Series)
(M Series) Workpiece coordinate system setting G92 cannot be specified. 1) After tool length compensation was changed by tool length...
PS5395 Cs Axis Number Over
The number of axes to be set for Cs-axis contour control exceeds the maximum number allowed in the system. Check...
PS5445 Can Not Command Motion in G39
Corner circular interpolation (G39) of tool radius/tool nose radius compensation is not specified alone but is specified with a move...
PS5446 No Avoidance at G41/G42
Because there is not interference avoidance vector, the interference check avoidance function of tool radius/tool nose radius compensation does not...
PS5447 Dangerous Avoidance at G41/G42
The interference check avoidance function of tool radius/tool nose radius compensation operation will lead to danger. Check for interference. Modify...