Home
Knowledge Base
TCM S Machine

TCM S Machine

Alarm

728 Articles

Prints

4 Articles

G71 OD Roughing Cycle

G71- OD Roughing Cycle T202M3S3000 G0X1.3Z-.005 G1X-.04F.002 G0X1.3Z-.1 G71U.125R-.05 G71P100Q101U.01W.005F.01 N100G0X.3 G1Z.74 X1.0 Z1.2 N101X1.3

G72 End Face Roughing Cycle

G72- End Face Roughing Cycle

G73 Closed Loop cutting Cycle

G73- Closed Loop cutting Cycle- (Pattern Repeat)

G75 Inner diameter/ Outer diameter Cutting off Cycle

G75- Inner diameter/ Outer diameter Cutting off Cycle

G76 Canned threading cycle

G76- Canned threading cycle. T0404M3S1339 G0X.35Z-.05 M12 G76P010029Q0030R0010 G76X.1887Z1.P0307Q0099F.05 G0X.35 G76 P010060 Q0020 R0005 (first G76 sets parameters for threading)...

Prev Next