- Home
- Knowledge Base
- TCM S Machine
TCM S Machine
PS0042 G45/G48 Not Allowed in CRC (M Series)
Tool offset (G45 to G48) is commanded in tool radius compensation mode. Modify the program. Quick tip; Modify program
PS0044 G27~G30 Not Allowed in Fixed Cycle (M Series)
One of G27 to G30 (G29 is only for the M series) is commanded in canned cycle mode. Modify the...
PS0045 Address Q Not Found (G73/G83)
In a high-speed peck drilling cycle or peck drilling cycle, the amount of each-time cutting is not specified by address...
PS0046 Illegal Reference Return Command
A command for a return to the second, third or fourth reference position is error (the address P command is...
PS0050 Chamfer/Corner Round Not Allowed in Thread Block
The chamfering or corner R block is specified in a threading block. Modify the program. Quick tip: Modify program