TCM S Machine

(T Series) The positioning command was issued in the speed control mode. Check the SV speed control mode signal (Fn521)....

(T Series) G96.1, G96.2, G96.3, and G96.4 are specified in the block that includes other commands. Modify the program.  ...

The spindle controlled with the servo motor is not set correctly. Check the parameters for the function of spindle control...

(M Series) In grinding canned cycles: 1) The signs of the I, J, and K commands do not match. 2)...

Parameters related to grinding canned cycles are incorrectly set. Probable causes are given below. 1) The axis number of the...