Untitled Article

  1. Home
  2. Knowledge Base
  3. Programming
  4. M Codes
  1. Home
  2. Knowledge Base
  3. Programming
  1. Home
  2. Knowledge Base
  3. TCM S Machine

M233-(M&S) X2-Z2 Control Mode ON
X2,Z2 Move, Z1 is stationary.
Allows T20’s to work on Main and Programming is done in Main.
T20’s offsets are inputed on the Main side
Z Minus is into the part in M233 even with Program in Main.
No Code allowed between M233 and M230 in Sub.
Built in wait code. Program on line by itself in main and sub.

T100M5
G0Z30.T0
M233 M233
M108(HP Coolant ON)
M50
G28H0
T2222M103S4000
G99G0X9.Z10.
G83Z-17.Q3200F.05
H90.Q3200
H90.Q3200
H90.Q3200
G80
G0Z50.T0
M105
M109(HP Coolant OFF)
M230 M230

Drill and Bore example

G0Z50.(Park stock 50mm from GB Z0)
M501 M501
M233 M233
T2121M3S2000
G0X0Z1.
G83Z-20.Q3000P500F.05
G0Z1.T0

T2323M3S2000
G50U-5.
G0X-11.2Z.1
G1X-10.Z-.5F.01
Z-10.F.02
X-9.
G0Z1.T0
G50U.5
G128
M230 M230
G0Z230.T0
M502 M502

Was this article helpful?

Related Articles