G150 Work Coordinate system setting

  1. Home
  2. Knowledge Base
  3. Programming
  4. G Codes
  5. G150 Work Coordinate system setting
  1. Home
  2. Knowledge Base
  3. Programming
  4. G150 Work Coordinate system setting
  1. Home
  2. Knowledge Base
  3. TCM S Machine
  4. G150 Work Coordinate system setting

G150-(M) Work Coordinate system setting
Z1 axis work coordinate system setting; G150 Z___. Don’t use G50Z(W)
G150 cannot be programmed in MDI.
G150 is set at cycle stop where cutoff process finished, main collet open.
Before G150 cancel offset.
O0001
M90002

G300X.2Z2.T0100
G150Z-.01(RH c/off)(G150Z[.6693-.078-.01] LH C/off);(Set G150 after G300)
M10

Was this article helpful?

Related Articles