G300 Main Spindle Machine Origin Return

  1. Home
  2. Knowledge Base
  3. Programming
  4. G Codes
  5. G300 Main Spindle Machine Origin Return
  1. Home
  2. Knowledge Base
  3. Programming
  4. G300 Main Spindle Machine Origin Return
  1. Home
  2. Knowledge Base
  3. TCM S Machine
  4. G300 Main Spindle Machine Origin Return

G300-(M)(Macro) Main Spindle Machine Origin Return
G300 returns each axis in the following order Y1,X1,Z1 to start point.

G300X.302Z1.5T0100
X___; machine position Cutoff end coordinates
Z___; Stroke required for machining work length +.5″
T___; Specify the cutoff tool or stopper

If for example the Cutoff endpoint in the program is X-.04, You would
set the cutoff tool in the machine with the presetter and touch the tool
to the outside of the stock. Set the Geometry offset with the measure
button. In MDI, call T0101;X-.04; and cycle start`and enter the current
X1 machine position into the G300 Line.

G300X-.04Z1.5T0101
X___; machine position Cutoff end coordinates
Z___; Stroke required for machining work length +.5″
T___; Specify the cutoff tool or stopper

If you program the G300 line with T0101 called, then the cutoff endpoint is the
desired endpoint in the x axis. This is typically X-.04″. The Z position for
rechuck would be affected by any offset in the Geometry or the Wear screens.
It is therefore necessary to place the Cutoff tool Z shifts for the Cutoff tool
in the program.

Order of movement is Y, X1 then Z1

When only the X1 axis command is executed without Y1 “510 Y X1 Data ERROR”
When illegal tool is called. “511 Y DATA ERROR” alarm occurs

Was this article helpful?

Related Articles