G87 Cross Peck drilling cycle

  1. Home
  2. Knowledge Base
  3. Programming
  4. G Codes
  5. Drilling Cycles
  6. G87 Cross Peck drilling cycle
  1. Home
  2. Knowledge Base
  3. Programming
  4. G Codes
  5. G87 Cross Peck drilling cycle
  1. Home
  2. Knowledge Base
  3. Programming
  4. G87 Cross Peck drilling cycle
  1. Home
  2. Knowledge Base
  3. TCM S Machine
  4. G87 Cross Peck drilling cycle

G87- Cross Peck drilling cycle X1 axis. T7-T10
G87 Z(W)__C(H)__X(U)__R__Q__P__F__K__M__
R= Distance from intial Point to R Point in radius
P= Dwell time at bottom of Hole
Q= Depth of cut for each cutting feed
F= Feedrate in IPM(G98) or IPR(G99)
K= Number of Repitions (When needed)
C Axis brake engages on G28H0

Note: G0,G1,G2 or G3 Cancel G87

T0707M50
G28H0M23S4000
G50W-.5118
G0X.8Z.5
G87 X.1 R-.04Q0200P100 F5.
C60.Q0200
C120.Q0200
G80
G50W.5118
G0x.8T0
M51

Was this article helpful?

Related Articles