T-Tool selection

  1. Home
  2. Knowledge Base
  3. Programming
  4. T-Tool selection
  1. Home
  2. Knowledge Base
  3. TCM S Machine
  4. T-Tool selection

T-Tool selection. Moves axis to position tools. Four digit is a tool call.
Two digit is an offset.

T0100 tool call
T0101 tool call with offset
T01 offset call
T0 cancel offset

With Geometry Offsets Do not call tool with an X move on the same line.
The Geometry offset will NOT be applied to the tool.

Offset 2 Y offset is disabled on all new machines because this shift only
works when tool is called with the offset. Use the Custom screen to enter
Y shifts.

Gang Tools
SQC20 .5″ T1-T6 T7-T10 Driven T11-T13 End Working
SQC32 .625″ T1-T5 T7-T10 Driven T11-T13 End Working
SQC38 .625″ T1-T5 T7-T10 Driven T11-T13 End Working

X2 Front working
SQC20 T20 Sub Spindle, T21-T22 Driven, T23 Internal, T29 Eject
SQC32 T20 Sub Spindle, T21-T22 Driven, T23 Internal, T29 Eject
SQC38 T20 Sub Spindle, T21-T22 Driven, T23 Internal, T29 Eject

X2 Back Working
SQC20 T31-T34 Back Work, T32-T34 Driven, T31 Fixed
SQC32 T31-T33 Back Work, T32-T34 Driven, T31 Fixed
SQC38 T31-T33 Back Work, T32-T34 Driven, T31 Fixed

Was this article helpful?

Related Articles