Alarm

M221 Z1/Z2 Synchronized ON

M221-(M&S)Z1/Z2 Synchronized(Superimpose) ON Superimposes Z2 on to Z1. Same Feedrate Only. Built in Wait code. Program on line by itself...

DS0001 Sync Excess Error (Pos Dev)

In feed axis control, the difference in the amount of positional deviation between the master and slave axes exceeded the...

DS0003 Synchronize Adjust Mode

The system is in the synchronize adjust mode. Use correct procedure. Quick tip; Use correct procedure.

DS0004 Excess Maximum Feedrate

The malfunction prevention function detected the command in which a value exceeding the maximum speed was specified. Modify the program....

DS0005 Excess Maximum Acceleration

The malfunction prevention function detected the command in which a value exceeding the maximum acceleration was specified. Modify the program....

Next