Alarm

PS0369 G31 Format Error

1) No axis is specified or two or more axes are specified in the torque limit switch instruction (G31P98/P99). 2)...

PS0370 G31P/G04Q Error

1) The specified address P value for G31 is out of range. The address P range is 1 to 4...

PS0372 Reference Return Incomplete

An attempt was made to perform an automatic return to the reference position on the orthogonal axis before the completion...

PS0373 Illegal High-Speed Skip Signal

In the skip commands (G31, G31P1 to G31P4) and dwell commands (G04, G04Q1 to G04Q4), the same high-speed signal is...

PS0375 Can Not Angular Control (SYNC:MIX:OVL)

Angular axis control is disabled for this axis configuration. 1) All related axes in angular axis control are not in...

Prev Next