- Home
- Knowledge Base
- Programming
- G Codes
G Codes
All the G codes
Drilling Cycles
2 ArticlesThreading Cycles
2 ArticlesG300 Main Spindle Machine Origin Return
G300-(M)(Macro) Main Spindle Machine Origin Return G300 returns each axis in the following order Y1,X1,Z1 to start point. G300X.302Z1.5T0100 X___;...
G301 Torque ON
G301- Torque ON This adjusts the torque of the axis servo motors X10 means 10% of full motor torque of...
G302 Torque OFF
G302- Torque OFF Returns Torque to 100 %. Tool change also returns torque to 100%
G310 Sub Spindle Machine Origin Return X2,Z2 axis
G310-(S)(Macro) Sub Spindle Machine Origin Return X2,Z2 axis G310Z9.0551T2000 Z9.0551 ; Z2 AXIS Starting Position(Machine Origin 230.mm) T2000 ; Specify...