G Codes

G76- Canned threading cycle. T0404M3S1339 G0X.35Z-.05 M12 G76P010029Q0030R0010 G76X.1887Z1.P0307Q0099F.05 G0X.35 G76 P010060 Q0020 R0005 (first G76 sets parameters for threading)...

G80- Cancel G8? series codes. G0,G1,G2,and G3 also cancel Canned cycles. Factory Recommends Using G80 on Drilling and Tapping cycle...

G83-Face Peck drilling cycle. There are (2) parameters related to G83. Param #5101 bit2 (RTR) “High speed” if “0” then...

G84- Face Rigid Tapping. Main using T11-15 or T20’s. Sub using T30’s fixed. The OitF machines use a Servo/Spindle motor...

G86- Front boring Cycle