Programming

G99- Feed commanded in Inch Per Revolution designation. IPR used for turning. IPR=IPM/RPM

G128-(M)Z2 Axis Zero Return The Z2 axis is returned to the Zero point by the main side program. G128 only...

G147- Sub Spindle Differential Speed mode OFF

G148- Sub Spindle Differential Speed mode ON The sub spindle speed command(S___) is converted into a relative rpm based upon...

G150-(M) Work Coordinate system setting Z1 axis work coordinate system setting; G150 Z___. Don’t use G50Z(W) G150 cannot be programmed...