Programming

T-Tool selection. Moves axis to position tools. Four digit is a tool call. Two digit is an offset. T0100 tool...

Direct Dimension Programming Can’t use in G2,G3,G90,G92,G94 or Threading Blocks. Can’t be used with Chamfering and Corner Rounding. Must Be...

Sample Peck Grooving/Cutoff T101 G97S1500 G0X1.3Z-.3 #1=1.2(FIRST PECK) #2=.04(END PECK X) wHILE[#1GT#2]DO1 G1X#1F.002 U.01 #1=#1-.02 End1 G1X-.04F.001 #1=#1-.02

Sample Rechuck or Regrip PROGRAM O1167(RECHUCK SAMPLE) O1168(SAMPLE RECHUCK) G0G18G20G40G80G97G99T0M8 G0G18G20G40G80G97G99T0M8 M98P9000(AUTO CUTOFF) G310Z9.0551T2000 M91168 M61 M11 G4P300 G300X-.03Z5.8T101 G150Z[.6384-.098-.01]...

Segmented Threading Positioning the tool may be exacting, but it is not difficult. Since CNC Swiss lathes have spindle encoders,...