TCM S Machine

A mode switchover failed at the time of activation. An attempt to activate a one-touch macro was made while not...

A subprogram call which is not a single block was commanded during canned cycle mode. Modify the program.   Quick...

(T Series) 1. The value of P, Q, or L specified by G51.4/G50.4/G51.5/G50.5/G51.6/G50.6 is invalid. 2. A duplicate value is...

The coordinate establishment of the Cs contour control axis is not made. Perform a manual reference position return. 1) When...

An inch/metric conversion was performed at a position other than the reference position. Perform an inch/metric conversion after returning to...