- Home
- Knowledge Base
- TCM S Machine
TCM S Machine
PW0006 Power Must Be Off (Illegal-Exec-Check)
The malfunction prevention function detected an alarm to require the power off. Quick tip: Cycle power once to clear...
PW0007 X-Address (SKIP) Is Not Assigned
The X address of PMC could not be assigned correctly. Possible causes are: 1) During the set of parameter No....
PW1102 Illegal Parameter (I-Comp)
The parameter for setting slope compensation is incorrect. This alarm occurs in the following cases: 1) When the size relationship...
PW1110 Illegal Parameter (Servo Motor Spindle)
The parameter for the spindle controlled with the servo motor is not set correctly. Check setup. Quick tip: Check...
PW1111 Illegal Spindle Number (Servo Motor Spindle)
The spindle number (parameter No. 11010) or spindle amplifier number (parameter No. 3717) for the spindle controlled with the servo...