TCM S Machine

Servo initialization has not completed successfully. It is probably that an optical cable failed or a connection between the amplifier...

The initialization of the FSSB was completed, but it could not be opened. Or, the connection between the CNC and...

1) This alarm is issued if axes, whose servo axis numbers (parameter No. 1023) are even and odd numbers, are...

The parameter setting is enabled (PWE, bit 0 of parameter 8900 is set to “1”). To set the parameter, turn...

How to use tool breakage option: Start out by editing your program by adding in M201-M205 before your feed move...