TCM S Machine

In rigid tap, an S value is out of range or is not specified. The parameter (Nos. 5241 to 5243)...

In rigid tap, spindle distribution value is too large (System Error). Replace main pcb.   Quick tip: Replace main pcb

In rigid tap, position for a rigid M-Code (M29) or an S command is incorrect. Modify the program.    ...

In rigid tap, an axis movement is specified between the rigid M-code (M29) block and G84 (or G74) block. Modify...

The command F code for a cutting feedrate is a zero. If the value of F command is much smaller...