TCM S Machine

An attempt was made to perform an automatic return to the reference position on the orthogonal axis before the completion...

In the skip commands (G31, G31P1 to G31P4) and dwell commands (G04, G04Q1 to G04Q4), the same high-speed signal is...

Angular axis control is disabled for this axis configuration. 1) All related axes in angular axis control are not in...

1) When parameter No. 1815#1 is set to “1”, parameter No. 2002#3 is set to “0”. 2) The absolute-position detection...

An unusable G code was used. Modify program. Alternatively, the option for that G code is not installed. Contact FANUC...