Alarm

PW0002 PMC Address Is Not Correct (Axis)

The X address of the PMC could not be assigned correctly. This alarm may occur in the following case: 1)...

PW0003 PMC Address Is Not Correct (Spindle)

The address to assign the spindle signal is incorrect. This alarm may occur in the following case: 1) The parameter...

PW0006 Power Must Be Off (Illegal-Exec-Check)

The malfunction prevention function detected an alarm to require the power off. Quick tip: Cycle power once to clear...

PW0007 X-Address (SKIP) Is Not Assigned

The X address of PMC could not be assigned correctly. Possible causes are: 1) During the set of parameter No....

PW1102 Illegal Parameter (I-Comp)

The parameter for setting slope compensation is incorrect. This alarm occurs in the following cases: 1) When the size relationship...

Prev Next